Getting The Desired Effects From Smoking Salvia Divinorum

Getting The Desired Effects From Smoking Salvia Divinorum

A lot of people are unsatisfied with the effects of Salvia Divinorum. This is often because they are doing something wrong along the way. They may not have the right dosage or they may be using the wrong techniques. Below, you’ll learn how to get the desired effects from smoking Salvia Divinorum.

The Active Ingredient

First and foremost, you should learn a little more about the active ingredient of Salvia Divinorum. It is actually salvinorin A, which is a diterpenoid compound. On average, the concentration salvinorin A within a leave will be right around 2.5 milligrams per gram.

For someone with moderate sensitivity, it would be acceptable to obtain .5 milligrams of Salvinorin A. This would be a moderate dosage. It should be possible to obtain the desired results by using 200 milligrams of 1/5 grams of Salvia divinorum leaves.

This should provide you with a sufficient amount of salvinorin A to get the effects that you’re after.

However, it is also important to note that this compound may be decomposed when the leaves are burned. It is also possible for some to escape the lungs and get lost into the atmosphere when exhaling. Therefore, you may actually need to use a higher dosage to get the desired results.

Upping the dose to 400 milligrams can increase the likelihood that you get what you want.

What Salvia Divinorum Is Like At 400 MG

You need to understand that smoking salvia divinorum at 400 milligrams can be a little tough. After all, this is going to create a bunch of smoke. You may need to inhale several times to ensure that you’re able to get it all. It is also pertinent to make sure that you ingest the smoke within a few minutes.

After all, salvinorin A will be metabolized by the body very rapidly. Try to be as efficient as possible or you will end up wasting the smoke and the leaves in the long run.

Some people will have little to no trouble inhaling the large smoke clouds. Other will have a very difficult time pulling it off. Therefore, it might be true that not everyone is going to be able to get the best results. Practice and patience can definitely help.

Potency Varies

You also need to know that Salvia Divinorum leaves are unique. It is very difficult to find two leaves that are identical. The potency can easily vary from one leafe to the next. In general, the leaves should contain anywhere from two to four milligrams for each gramm.

There are some leaves that will contain far less than that. It is very important to find out the potency of your leaves before smoking. If you’re going to be smoking leaves with a higher potency, you need to make sure that you’re sticking with a lower dosage. Otherwise, you might be overdoing it. It’s also very important to buy high quality salvia divinorum and not something cheap from unreliable vendors.

dried salvia divinorum

Extract-Enhanced Leaves

There are some Salvia divinorum leaves that will be extract-enhanced. This basically means that they’re going to be far more powerful than conventional leaves. If you’re going to be smoking these leaves, you’re going to need to adjust the dosage accordingly.

It is generally best to decrease the dosage, since the leaves are going to be so potent. Really, the dosage that you need will depend on two factors. First, you need to consider the amount of salvinorin A in the leaf. Second, you need to think about your own sensitivity.

A little experimentation will be needed to find out what works best for you. Find out what your sensitivity is and go from there.

Tips For Getting It Right

There are plenty of things that you can do to enhance your experience with Salvia divinorum. Some of the best tips for getting it right will be provided below.

Water-Cooled Device

First and foremost, you should try smoking using some type of water-cooled device. A water bong or pipe would do the trick. This will make it much easier for you to inhale the massive smoke balls. The smoke will be cooled, so you shouldn’t have any trouble inhaling it all. This will also help you avoid coughing so much.

Cleaning Stem And Screen

You need to make sure that your equipment is clean and ready to go. Check the stem and screen. Clean the stem and make sure that the screen has been changed. This will help to ensure that the pipe draws exceptionally well.

Inhale Fully

You really need to master the art of smoking Salvia divinorum. It is always best to try to inhale the complete dose with as few inhalations as possible. Try to get everything down with three inhalations. Be sure to inhale as deep and slow as possible.

Also, you need to hold the smoke in for a good 20 to 30 seconds before exhaling. Make sure that you hold in the smoke as deeply as possible to ensure that the Salvinorin A is actually absorbed by the lungs.

Direct Contact With Flame

In order to vaporize the Salvinorin A, you’re going to need very high temperatures. Achieving those temperatures won’t be too difficult. You just need to make sure that the leaves make direct contact with the flame.

Using The Right Lighter

You also need to make sure that you’re using the right lighter. A torch-flame model will do the best. This is the case, because these lighters offer hotter temperatures. Follow this advice and you should have little to no trouble getting the desired results from your salvia divinorum.

error: Content is protected !!